Operation CHARM: Car repair manuals for everyone.

Power Steering Pump - New Outlet Quick Connect Fitting

89ford23

STEERING-POWER-NEW CII PUMP OUTLET "QUICK CONNECT" FITTING-5.0L EFI AOD AND 5.8L CFI AOD (CANADA APPLICATION ONLY)-VEHICLES BUILT FROM 6/19/89 THROUGH 8/21/89
Article No. 89-17-2

Figure 1:




FORD: 1989 CROWN VICTORIA

LINCOLN-MERCURY: 1989 GRAND MARQUIS


ISSUE: A new design power steering pump outlet quick connect fitting was used on about 6000 vehicles. The pump can be easily identified by its HBC-JL model code. Figure 1 shows the comparison between the 1990 and prior year designs.

ACTION: If service is required, refer to the following service procedure when replacing the hose or pump.

HOSE REPLACEMENT

1. Remove hose assembly.

2. Obtain replacement hose (E0AZ-3A719-A), outlet fitting (E5LY-3D654-A), small o-ring (384975-S94) and large o-ring (391032-S).
3. Replace the outlet fitting on the power steering pump with outlet fitting (E5LY-3D654-A) along with the two o-rings.

4. Install replacement hose.

NOTE: AFTER JOB # 1, 1990, AVAILABLE 1990 LEVEL SERVICE HOSE MAY BE USED WITHOUT MODIFICATION.

PUMP REPLACEMENT

Replacement of the pump assembly requires transfer of the outlet fitting from the removed pump to the new pump.

1. Obtain a pair of o-rings (384975-S94 & 391032-S) along with the replacement pump.

2. Remove the outlet fitting from the old pump and install it on the new pump using the new o-rings.

3. Install power steering pump. Refer to the 1989 Car Shop Manual, Section 13-51 for service details.

4. Install new plastic seal washer (388898-S) on the hose fitting.

5. Assemble hose to pump.

NOTE: AFTER JOB # 1, 1990, AVAILABLE 1990 LEVEL SERVICE PUMPS MAY BE USED WITHOUT FITTING TRANSFER.

PART NUMBER PART NAME CLASS

E0AZ-3A719-A Hose Assembly A
E5LY-3D654-A Outlet Fitting BM
384975-S94 O-ring - small S
391032-S O-ring - large S
388898-S Seal Washer RS

OTHER APPLICABLE ARTICLES: None
WARRANTY STATUS: Eligible Under Basic Warranty Coverage

OPERATION DESCRIPTION TIME
891702A Clean & Change Fitting On 0.1 Hr.
Pump Or Line Replacement
DEALER CODING
BASIC PART NO. CONDITION CODE
3A719 77
OASIS CODES: 3100, 3520