Engine: Technical Service Bulletins
- Recalls
- Recall - Part IV Fuel Injection/Emissions Modifications
- Overview
- Attachment I Technical, Parts Labor, and Claim Processing
- Exhibit I Fuel Injector Inspection Instructions
- Exhibit 2 Injector Removal and Installation Procedure
- Exhibit 3 2.3L CFI Engines
- Exhibit 3 RPM Setting Procedure 1.9L CFI Engines
- Modifications Decal For All Vehicles
- Dealer Letter
- Owner Letter
- Recall - Part IV Fuel Injection/Emissions Modifications
- Customer Interest
- Engine - Stalls When Cold
- Engine - Hard Cold Starts/Hesitation/Stalls On Start-Up
- VECI Decal - Incorrect Spark Plug Information
- Engine - Tapping Noise
- Engine - Valve Tappets Noisy
- Engine - Erratic Idle/Hesitation
- Instrument Cluster Warning Lights - Dimly Lit
- Engine - Oil Consumption/Spark Knock/Plug Fouling
- Engine - Rough Idle/Hesitation/Backfire/Stalling
- By Symptom
- Abnormal wear/deterioration
- Customer Interest
- Engine - Stalls When Cold
- Engine - Hard Cold Starts/Hesitation/Stalls On Start-Up
- VECI Decal - Incorrect Spark Plug Information
- Engine - Tapping Noise
- Engine - Valve Tappets Noisy
- Engine - Erratic Idle/Hesitation
- Instrument Cluster Warning Lights - Dimly Lit
- Engine - Oil Consumption/Spark Knock/Plug Fouling
- Engine - Rough Idle/Hesitation/Backfire/Stalling
- Driveability
- False instrument warning light/gauges
- Noise
- Poor performance
- Recalls
- Recall - Part IV Fuel Injection/Emissions Modifications
- Overview
- Attachment I Technical, Parts Labor, and Claim Processing
- Exhibit I Fuel Injector Inspection Instructions
- Exhibit 2 Injector Removal and Installation Procedure
- Exhibit 3 2.3L CFI Engines
- Exhibit 3 RPM Setting Procedure 1.9L CFI Engines
- Modifications Decal For All Vehicles
- Dealer Letter
- Owner Letter
- Recall - Part IV Fuel Injection/Emissions Modifications
- All Technical Service Bulletins
- Adhesives and Sealants - Availability and Usage
- Engine Assembly - Proper Identification
- Engine Serial Numbers - Location
- Engine - Stalls When Cold
- Engine - Hard Cold Starts/Hesitation/Stalls On Start-Up
- VECI Decal - Incorrect Spark Plug Information
- Spark Plug - New Service Application
- Rod Journal/Crankshaft Bearing Bore - Specifications
- Engine - Tapping Noise
- Engine - Valve Tappets Noisy
- Valve Tappets - Correct Service Usage
- Roller Type Tappet - Installation Service Tip
- Roller Tappet - Installation Service Tip
- Engine - Cylinder Bore Diameter Correction
- Aluminum Oil Pan - Heli-Coil Repair of Drain Plug
- Intake Manifold - Installation Damage Prevention
- Engine - Intake Manifold Cleaning Before Installation
- Recall - Part IV Fuel Injection/Emissions Modifications
- Overview
- Attachment I Technical, Parts Labor, and Claim Processing
- Exhibit I Fuel Injector Inspection Instructions
- Exhibit 2 Injector Removal and Installation Procedure
- Exhibit 3 2.3L CFI Engines
- Exhibit 3 RPM Setting Procedure 1.9L CFI Engines
- Modifications Decal For All Vehicles
- Dealer Letter
- Owner Letter
- Engine - Erratic Idle/Hesitation
- Instrument Cluster Warning Lights - Dimly Lit
- Ignition System - Diagnostics Manual Correction
- Engine - Correct Oil Fill Level Markings
- Engine - Oil Consumption/Spark Knock/Plug Fouling
- Engine - Oil Dipstick May Not Be Read Correctly
- Crankshaft Damper - Revised Removal Procedure
- Engine Oil - Recommended Usage
- Accessory Drive Belt - `V' Ribbed Belt Cracking
- Engine - Normal Oil Consumption
- Engine - Rough Idle/Hesitation/Backfire/Stalling