Clarion Brand Radio - Time Display Setting
88ford05CLOCK - ELECTRONIC - TIME DISPLAY SETTING Article No.
PROCEDURE FOR CLARION BRAND RADIOS - 88-6-10
VEHICLES BUILT BEFORE 11/01/87
FORD: 1987 ESCORT
LINCOLN-MERCURY: 1987 LYNX
LIGHT TRUCK: 1987 F-SERIES 1987-88 RANGER, BRONCO II 1988 BRONCO
ISSUE: The electronic clock display setting procedure to allow the clock mode to be displayed all the time has caused some confusion for customers. The instructions provided with the vehicle for setting the clock on Clarion brand radios may be for Ford manufactured radios instead of the Clarion brand radios. The Clarion brand radios may be identified by refering to the information published in TSB Article 87-11-7.
ACTION: If service is required, the following clock setting procedure should be used.
NOTE: The Clarion brand radio operating guide (E87F-19A016-AA) may be ordered at no charge from Helm, Inc.
Attention: PUBLICATIONS SALES GROUP Helm, Inc. 14310 Hamilton Highland Park, Michigan 48203
1. Push the "ON/OFF/VOLUME" control and release.
2. Within five (5) seconds push and hold the "ON/OFF/VOLUME" control.
3. While holding the "ON/OFF/VOLUME" control, push and then release the "SEEK" button.
4. Release the "ON/OFF/VOLUME" control.
NOTE: This procedure will allow the radio to stay in the clock display mode.
OTHER APPLICABLE ARTICLES: 87-11-7
WARRANTY STATUS: "INFORMATION ONLY"