Maintenance: Technical Service Bulletins
- Recalls
- Recall - Part IV Fuel Injection/Emissions Modifications
- Overview
- Attachment I Technical, Parts Labor, and Claim Processing
- Exhibit I Fuel Injector Inspection Instructions
- Exhibit 2 Injector Removal and Installation Procedure
- Exhibit 3 2.3L CFI Engines
- Exhibit 3 RPM Setting Procedure 1.9L CFI Engines
- Modifications Decal For All Vehicles
- Dealer Letter
- Owner Letter
- Recall - Part IV Fuel Injection/Emissions Modifications
- Customer Interest
- Brakes - Roughness During Application
- Radio - Noise/Static On FM Band
- Aluminum Wheel - Air Leaks
- Polycast Wheels - Paint Chipping or Peeling
- Engine - High/Erratic Idle
- Instrument Cluster Warning Lights - Dimly Lit
- Engine - Rough Idle or Stall At Idle
- Wheel Covers - Loosen/Fall Off
- Engine - Rough Idle/Hesitation/Backfire/Stalling
- By Symptom
- Abnormal wear/deterioration
- Abnormal/Uneven wear
- Customer Interest
- Brakes - Roughness During Application
- Radio - Noise/Static On FM Band
- Aluminum Wheel - Air Leaks
- Polycast Wheels - Paint Chipping or Peeling
- Engine - High/Erratic Idle
- Instrument Cluster Warning Lights - Dimly Lit
- Engine - Rough Idle or Stall At Idle
- Wheel Covers - Loosen/Fall Off
- Engine - Rough Idle/Hesitation/Backfire/Stalling
- Driveability
- Erratic Operation
- False instrument warning light/gauges
- Leaks
- Loose
- Noise
- Poor performance
- Recalls
- Recall - Part IV Fuel Injection/Emissions Modifications
- Overview
- Attachment I Technical, Parts Labor, and Claim Processing
- Exhibit I Fuel Injector Inspection Instructions
- Exhibit 2 Injector Removal and Installation Procedure
- Exhibit 3 2.3L CFI Engines
- Exhibit 3 RPM Setting Procedure 1.9L CFI Engines
- Modifications Decal For All Vehicles
- Dealer Letter
- Owner Letter
- Recall - Part IV Fuel Injection/Emissions Modifications
- Vibration
- Vibration/Pulsating brakes
- All Technical Service Bulletins
- Vehicle Storage - Maintenance Tips
- A/C - Filtering Refrigerant After Compressor Replacement
- Brakes - Roughness During Application
- Radio - Noise/Static On FM Band
- Wheels - Loss Of Balance Weights
- Aluminum Wheel - Air Leaks
- Lug Nuts - Proper Torqueing Procedure
- Polycast Wheels - Paint Chipping or Peeling
- Aluminum Wheel - New Improved Wrench Adapter
- Lug Nuts - Proper Installation/Torqueing Procedure
- Recall - Part IV Fuel Injection/Emissions Modifications
- Overview
- Attachment I Technical, Parts Labor, and Claim Processing
- Exhibit I Fuel Injector Inspection Instructions
- Exhibit 2 Injector Removal and Installation Procedure
- Exhibit 3 2.3L CFI Engines
- Exhibit 3 RPM Setting Procedure 1.9L CFI Engines
- Modifications Decal For All Vehicles
- Dealer Letter
- Owner Letter
- Engine - High/Erratic Idle
- Instrument Cluster Warning Lights - Dimly Lit
- EEC Universal Distributor - Drive Gear Removal Tool
- Ignition System - Diagnostics Manual Correction
- Engine - Correct Oil Fill Level Markings
- Engine - Rough Idle or Stall At Idle
- Engine Oil - Recommended Usage
- Engine Coolant - Recycled Coolant Not Authorized
- Recycled Engine Coolant - Service Tips
- Wheel Covers - Loosen/Fall Off
- Accessory Drive Belt - `V' Ribbed Belt Cracking
- Accessory Drive Belt - Seating Procedure
- A/T, M/T - New `Mercon' Transmission Fluid
- A/C - R12 Refrigerant Service Tips
- A/C - R12 Refrigerant Substitutes Service Tip
- R-12 Refrigerant - Substitutes
- Air Conditioning - Use of Correct Fluorescent Tracer Dye
- A/C - Identification of Non Approved Refrigerants
- Vehicle - Driveability/Transmission Concerns
- Engine - Rough Idle/Hesitation/Backfire/Stalling
- Ignition Timing Procedure - Manual Update
- Flywheel Timing Mark - Identification
- Idle Fuel Mixture - Manual Revision
- Front/Rear Alignment - Specifications