A/T - AXOD Late Upshifts/High Throttle Valve Pressure
DATE: 1996TECHNICAL BULLETIN # 331
TRANSMISSION: AXOD
SUBJECT: Late Upshifts/High T.V. Pressure
APPLICATION: Ford, Mercury
AXOD
Install a pressure gauge into the T.V. pressure port (figure 1). With the engine off, adjust the T.V. cable to maximum. Start the engine and observe the gauge. Slowly adjust the cable to obtain 12-14 psi at idle. If T.V. pressure cannot be adjusted, and remains high, remove the valve body and enlarge the T.V. balance hole to .055" (figure 2).