Steering Gear - Shop Manual Correction
88ford2STEERING GEAR - INCORRECT INPUT SHAFT "ON CENTER" POSITION - SHOP MANUAL CORRECTION
Article No. 88-2-8
FORD: 1986-88 TAURUS
LINCOLN-MERCURY: 1986-88 SABLE
This article is being republished in its entirety to correct the illustration.
ISSUE: The steering gear assembly "on center" position for the input shaft was incorrectly shown in the 1986-88 Taurus/Sable Shop Manual.
FIGURE 13:
ACTION: If service is required, use Figure 13 of this TSB for the correct illustration. This change should be inserted in your 1986, 1987, and 1988 Taurus/Sable Shop Manuals, Section 13-46.
OTHER APPLICABLE ARTICLES: Supersedes 87-25-4
WARRANTY STATUS: "INFORMATION ONLY"