Page 16-20-5

1989
16-20-5 Transmission, Manual-MSR2 16-20-5




DISASSEMBLY AND ASSEMBLY (Continued)

4. Using a 14 mm socket, remove nine extension housing retaining bolts. Pry gently at locations provided on extension housing and transmission case. Remove extension housing from case.
NOTE: Remove roll pin using a pencil magnet.



5. Remove countershaft oil funnel by hand. Note position of tabs for assembly.



6. Remove shift rail and selector finger assembly from transmission case.
7. Using a 12 mm wrench, remove 10 top cover assembly retaining bolts. Remove top cover assembly.



8. Remove offset lever and control selector spring from extension housing.