Traction-LOK Limited Slip Differential

Fig. 5 C-clips and ``S'' Shaped Preload Spring Removal. Ford Traction-Lok:

Fig. 6 Exploded View Of Ford Traction-Lok:

For differential case and ring gear run-out checks and differential bearing replacement, refer to ``Except Traction-LOK Limited Slip Differential.''
1. Remove and discard ring gear to differential case attaching bolts.
2. Tap on ring gear using a suitable mallet and remove ring gear from case.
3. Remove pinion shaft lock screw and pinion shaft.
4. Remove preloaded ``S'' shaped spring, Fig. 5. Use caution when removing ``S'' shaped spring, since it is under tension.
5. Rotate pinion gears and thrust washers using 12 inch socket extension inserted into pinion gear rotator T80P-4205-A or equivalent until they can be removed through access hole.
6. Remove left and right side gears, clutch packs and shims, Fig. 6. Note order of removal and side removed from and tag for reference during assembly.