Star Tester & Self-Test Connector Hook-Up
STAR tester & self-test electrical connector assembly:
The self-test connector and tester hook-up is identical on all models. A two-piece self-test connector on the vehicle, plugs into a matching two-piece service connector at the end of the STAR/Self-Test adapter cable assembly. To connect the STAR tester proceed as follows:
1. Turn ignition switch to OFF position.
Self-test connectors:
2. Connect the color-coded adapter cable leads onto the STAR tester.
3. Connect the adapter cables two service connectors to the matching self-test connectors on the vehicle.
Checking STAR tester:
To check the STAR tester, turn the power switch, located on the right side of the tester to ON position. The tester will run a display check and the numerals 88 will begin to flash. A steady 00 will then appear to signify that the tester is ready to start the self-test and receive service codes.