Fuel Pump
TORQUE VALUESAir Cleaner Stud 6-9 lb. ft. (8-12 N-m)
Carburetor Assy. to Intake Manifold 12-15 lb. ft. (16-20 N-m)
Choke Cap Retaining Screws 15-22 lb. in. (1.7-2.5 N-m)
Choke Control Diaphragm Cover Screws 13-19 lb. in. (1.5-2.1 N-m)
Choke Control Diaphragm Cover Screws Breakway
Feedback Motor 8-10 lb. ft. (11-14 N-m)
Fuel Outlet line 15-18 lb. ft. (20-24 N-m)
Fuel Filter to Carburetor 80-100 lb. ft. (10-11 N-m)
Fuel Filter Retaining Nut 7-10 lb. in. (10.2-14.1 N-m)
Fuel Pump to Cylinder Block 19-27 lb. ft. (26-37 N-m)
Main Body to Throttle Body Screws 24-35 lb. in. (2.7-4.0 N-m)
1/8 Inch Pipe Plug Fuel Inlet Boss 5-7 lb. ft. (7-9 N-m)
Steel Lines to Fuel Pump 15-18 lb. ft. (20-24 N-m)
Throttle Plate Screws (Before Staking) 10-15 lb. in. (1.1-1.7 N-m)
Venturi Valve Cover Plate 24-35 lb. in. (2.7-4.0 N-m)
Venturi Valve Diaphragm Cover 15-22 lb. in. (1.7-2.5 N-m)
Upper Body to Main Body Screws 24-35 lb. in. (2.7-4.0 N-m)
CARBURETOR
Float Level 1.010-1.070 inches (25.66-27.17 mm)
Float Drop 1.430-1.490 inches (36.33-37.84 mm)
Gap Between the Valve and Venturi Opening Wall 0.39-0.41 inch (9.91-10.41 mm)
Maximum Opening Between Valve and Air Horn Wall 0.99-1.01 inch (25.15-25.65 mm)