W/Disc Brakes

Fig. 25 Parking Brake Cable Adjusting Locknut:

Fig. 26 Caliper Lever Alignment Marks:

1. Release parking brake lever.
2. Raise and support vehicle.
3. Remove adjusting locknut retainer, Fig. 25.
4. Loosen adjuster locknut and adjuster until both parking brake levers on calipers have fully returned to stop.
5. Mark caliper lever and caliper housing, Fig. 26.
6. Rotate cable adjuster against body abutment bracket until either parking brake caliper lever starts to move from alignment marks.
7. Tighten adjuster locknut finger-tight, then using a wrench, tighten an additional 3-6 clicks. One complete turn of the adjuster equals six clicks.
8. Install locknut retainer, then lower vehicle and check parking brake operation.