Front Center Sensor

Removal

WARNING: THE ELECTRICAL CIRCUIT NECESSARY FOR SYSTEM DEPLOYMENT IS POWERED DIRECTLY FROM THE BATTERY AND BACKUP POWER SUPPLY. TO AVOID ACCIDENTAL DEPLOYMENT AND POSSIBLE PERSONAL INJURY, THE BATTERY GROUND CABLE AND BACKUP POWER SUPPLY MUST BE DISCONNECTED PRIOR TO SERVICING OR REPLACING ANY SYSTEM COMPONENTS.

1. Disconnect battery ground cable and backup power supply.
2. Disconnect center front sensor electrical connector and wiring retainer.
3. Remove screws attaching front sensor to radiator support. Remove sensor from vehicle.





Installation
1. Position front center sensor with arrow on top pointing toward front of vehicle and secure to radiator support with retaining screws. Tighten retaining screws to 4-5 Nm (35-50 lb-in).
2. Connect front center sensor wire lead connector to wiring assembly connector and install wiring retainer.
3. Connect backup power supply and battery ground cable.
4. Verify air bag indicator lamp.