Front
Glass adjustment is minimal. The glass is installed in the door frame and run assembly in the full-up position prior to securing the run and bracket assembly.
Fore-and-Aft
Adjustment is made by loosening the upper and assembly
and positioning the glass as required in lower attaching
screws on the run and bracket the door frame to permit
smooth operation.
Door Glass Run
The door glass run assembly is force fit into the door
frame to fit snugly around the entire glass edge when the
glass is in the full-up position. This retainer is
telescoped into the door frame at the belt and retained
with a screw and washer assembly located below the door
latch opening.