Wagon

1. Raise and support vehicle.
2. Remove U-bracket retaining nuts and bolts from either side, then slide U-brackets and insulators from stabilizer bar.
3. Remove link to body bracket attaching nuts and bolts, then the stabilizer and link assemblies.
4. Slide link assemblies from stabilizer bar.
5. Inspect attaching parts for damage and replace as necessary.
6. Reverse procedure to install, noting the following:
a. Install new nuts and bolts, then torque link to body bracket attaching nuts and bolts to specifications.
b. Install new nuts and bolts, then torque U-bracket attaching nuts and bolts to specifications.