Grease Seal/Bearings

Tool(s) Required:
Description and Tool Number
Seal Replacer ... T87C-1175-A

Removal
1. Remove the brake rotor/bearing hub assembly.
2. Remove the bearing grease seal using a large screwdriver. Discard the seal.
3. Remove the inner bearing from the bearing hub.

NOTE: If the bearings are to be reused, they should be tagged so that they can be installed in their original positions.

4. Check and inspect bearings and race.

Check Hub And Bearings For Lubricant:

Installation
1. Pack the bearings and the hub area shown in the illustration with Premium Long Life Grease C1AZ-19590-E (ESA-M1C75-B) or equivalent.
2. Position the inner bearing in the bearing hub.
3. Lubricate the grease seal lip with Premium Long Life Grease C1AZ-19590-E (ESA-M1C75-B) or equivalent. Form the lubricant into a fillet along the seal lip edges.

Install New Seal:

4. Install a new grease seal using Seal Replacer T87C-1175-A.
5. Install the rotor/bearing hub assembly.