Fluid - A/T: Testing and Inspection

NOTE: MERCON Automatic Transmission Fluid is being replaced by MERCON V as a service fluid.

CHECKING OIL LEVEL

1. With transmission at operating temperature, park vehicle on level surface.
2. Operate engine at idle speed with parking brake applied and move selector lever through each detent position. Return selector lever to Park.
3. With engine idling, remove dipstick and check fluid level. Fluid level should be between arrows on dipstick.
4. Add fluid as necessary to bring fluid to proper level. Use MERCON or MERCON V ATF or equivalent meeting FORD specification.