Technician Safety Information

1. Always wear appropriate eye protection.

2. Use caution when working near the catalytic converter to prevent the possibility of burns. The temperatures within the converter can exceed 1000°F.

3. Ignition systems present a shock hazard; exercise care when performing spark test and always use non-conductive ignition wire pliers.

4. When servicing the fuel system use the following precautions:
a. Set up a "CAUTION: FLAMMABLE" sign in the workshop area.
b. Be sure the shop is equipped the proper fire extinguisher.
c. Disconnect the negative battery cable before starting service work.
d. Place a suitable container under the connection to be opened.
e. Place a shop cloth over the fittings to be disconnected. This will catch any pressurized spray when the lines are opened.
f. Slowly open connection, allow pressure to escape, and catch spilled fuel in container.

NOTE: If available, use system bleed valve (schrader) to relieve pressure.

g. After disconnecting the line(s) or hose(s), plug all fittings.
h. Put any drained fuel in an explosive-proof container with a secure fitting lid.