A10 - A11

A10 Actuator (Electrical) Check
- Turn ignition switch to OFF.
- Disconnect actuator connector from harness connector.






- Connect DVOM to Circuits 495 and 496.
- Measure resistance.
- Connect DVOM to Circuit 497 and 498.
- Measure resistance.
Is the resistance between 43 and 70 Ohms?
Yes
Go to A11.
Is the resistance less than 43 or greater than 70 Ohms?
Yes
REPLACE actuator.
Go to A2. A1 - A3

A11 Continuity Check
- Turn ignition switch to OFF.
- Disconnect module connector from module.
- Disconnect actuator connector from actuator.
- Check continuity of Circuit 495 from module connector to actuator connector.
- Repeat for Circuits 496, 497 and 498.
Do all circuits check OK?
Yes
Go to A9. A9
No
SERVICE harness.
Go to A2. A1 - A3