Air Bag(s) Arming and Disarming: Service and Repair

To Deactivate System:
1. Disconnect battery positive cable.






2. Remove four nut and washer assemblies retaining driver air bag to steering wheel.
3. Disconnect driver air bag connector.
4. Attach Rotunda Air Bag Simulator 105-00008 or equivalent on clockspring to simulate the air bag.
5. Connect positive battery cable.

To Reactivate System:
1. Disconnect battery positive cable.
2. Remove Rotunda Air Bag Simulator tool from air bag terminals on clockspring assembly, if connected.
3. Reconnect driver air bag module connector.
4. Position driver air bag module on steering wheel and secure with four nut and washer assemblies (10 mm). Tighten nut and washer assemblies to 4-5.5 N.m (36-49 lb-in).
5. Connect battery positive.
6. Verify air bag indicator.