Brake Light Switch: Service and Repair

Fig. 2 Stop Light Switch:

1. On models equipped with airbag, disarm airbag system as described under MAINTENANCE PROCEDURES/AIRBAG SYSTEM DISARMING.
2. Disconnect battery ground cable.
3. Remove retainer and outer white nylon washer from pedal pin. Slide switch off brake pedal pin far enough so that outer side of plate of switch clears pin. Remove switch, Fig. 2.
4. Reverse procedure to install.
5. On models equipped with airbag, rearm airbag system as described under MAINTENANCE PROCEDURES/AIRBAG SYSTEM DISARMING.