Instrument Cluster / Carrier: Service and Repair

Removal
1. Pull out storage compartment. Remove two upper screws, two lower screws, and heater/radio bezel.
2. Remove trim covers located on both sides of steering column by pulling outward.
3. Remove retaining screws and carefully pull instrument cluster bezel partially away from instrument panel.
4. Disconnect electrical connectors from clock and switches in bezel.





Installation
1. Connect electrical connectors to clock and switches.
2. Position instrument cluster bezel and install retaining screws.
3. Position trim covers on both sides of steering column and snap into place.
4. Position heater/radio bezel and install securing screws.
5. Install storage compartment if equipped.