Instrument Cluster - Finish Panel

Removal and Installation
1. Disconnect positive battery cable.
2. Engage parking brake.
3. Remove ignition lock cylinder.






4. If equipped with tilt column, tilt column to full down position and remove tilt lever.
5. Remove four bolts and opening cover from under steering column.
6. Remove steering column trim shrouds. Disconnect all electrical connections from steering column multi-function switch.







7. Remove two screws retaining multi-function switch and remove switch.
8. Pull gear shift lever to the full down position (column shift).
9. Remove five cluster opening finish panel retaining screws.
10. Remove finish panel by pulling toward driver to unsnap snap-in retainers and disconnect wiring from switches, clock and warning lamps.
11. To install, reverse Removal procedure.