Air Cleaner Housing: Service and Repair

Air Cleaner Assembly

Removal

1. Remove negative battery cable.

2. Disconnect coil high tension lead, coil connector and Vain Air Flow (VAF) connector.

3. Remove clamp and position air cleaner outlet tube out of the way.

4. Remove two nuts, one bolt and air cleaner assembly.

5. Loosen nut and remove nozzle, if required.





6. Remove two nuts, one bolt and air cleaner assembly.

7. Remove bolts and brackets if necessary.

Installation

1. Install brackets with bolts, if removed.

2. Install nozzle with nut and washer, if removed.

3. Install air cleaner assembly with two bolts and one nut. lighten securely.

4. Connect air cleaner outlet tube. lighten screw type hose clamp to 2.5-3.5 Nm (22-31 in lb).

5. Install VAF and coil connectors. Connect coil high tension lead.

6. Connect negative battery cable.





7. Start engine and check for vacuum leaks. Service as required.