Air Cleaner Housing: Service and Repair
REMOVAL and INSTALLATIONAir Induction System:
1. Loosen engine air cleaner tube clamp at mass airflow sensor.
2. Remove air cleaner outlet tube from mass airflow sensor.
3. Disconnect engine control sensor wiring from mass airflow sensor.
4. Remove air cleaner element.
5. Remove engine air cleaner retaining nuts and engine air cleaner.
6. To install, reverse Removal procedure. Tighten engine air cleaner retaining nuts to 8.0-11.5 Nm (71-102 lb in). Tighten engine air cleaner tube clamp to 2.3-3.4 Nm (20-30 lb in).