Instrument Cluster - Mask

REMOVAL
1. Remove instrument cluster.
2. Set instrument cluster on clean surface facing up.
3. Remove warning indicator miniature bulbs.

NOTE: Instrument cluster mask cannot be removed from instrument cluster back plate unless miniature bulbs are removed.

4. Remove five screws retaining instrument cluster mask to instrument cluster back plate.
5. Disconnect cluster instrument indicator switch connector from instrument cluster back plate and remove instrument cluster mask.

INSTALLATION
1. Insert instrument cluster mask switch connector into instrument cluster mask.
2. Place instrument cluster mask on instrument cluster back plate and install five retaining screws.
3. Install warning indicator miniature bulbs.
4. Install instrument cluster.