CD - Turn Signal Lamps on Continuously

Pinpoint Test CD: Turn Signal Lamps On Continuously

CD1 - Check Multi-Function Switch

- Remove multi-function switch as outlined.
- Test multi-function switch per component test as outlined.

Did multi-function switch test OK?

YES GO to CD2.
NO REPLACE multi-function switch. RESTORE vehicle. RETEST system.

CD2 - Check Indicator Flasher

- Reconnect multi-function switch.
- Gain access to the indicator flasher as outlined.
- Disconnect indicator flasher.

Did lamps turn off?

YES REPLACE damaged multi-function switch. RESTORE vehicle. RETEST system.
NO SERVICE Circuit 44 (LB) for short to B+. RESTORE vehicle. RETEST system.