Heated Back Window Switch and Light

Heated Back Window Switch and Light

1. Ground pin 4 and connect a jumper wire between pins 2 and 3.

2. Apply power to pin 2. The indicator should not light.

3. Momentarily actuate the heated back window switch and light (18C621) to ON. The indicator should come on and stay on after the heated back window switch and light returns to the normal position.

4. The indicator should go off under any one or more of the following conditions:

- Heated back window switch and light is moved to OFF.
- Jumper wire between pins 3 and 2 is removed.
- Approximately 10 minutes has elapsed.