Displaying and Reading Trouble Codes

NOTE: Ford DOES NOT provide procedures to retrieve or clear trouble codes without the New Generation Star (NGS) tester.

1. Turn ignition switch to the OFF position.
2. Locate the data link connector under instrument panel.
3. Connect the New Generation Star (NGS) tester to the data link connector.
4. Select vehicle and year.
5. Turn the ignition switch to the RUN position.
6. At first screen press the trigger to PAGE FORWARD.
7. At the next screen, select DIAGNOSTIC DATA LINK. Press trigger.
8. At the next screen, select ABS-ANTI-LOCK BRAKE MODULE. Press trigger.
9. At the next screen, select DIAGNOSTIC TEST MODES. Press trigger.
10. At the next screen, select RETRIEVE/CLEAR CONTINUOUS DTCs. Press trigger.
11. At the next screen, press the START button.
12. At this screen, all DTCs will be displayed. Record all DTCs.
13. The On-Board Diagnostic Trouble Code Index should be used to diagnose the anti-lock brake system. Ensure the diagnostic procedures are followed step-by-step in order as indicated. Following the wrong sequence or bypassing steps will lead to unnecessary replacement of parts and/or incorrect resolution of the symptom. Diagnostic Trouble Code (DTC) Index