Rear Door Glass

In-and-Out

1. Remove rear door trim panel and watershield. Doors

2. Loosen two screws retaining rear door window stabilizer.

3. Position front door window glass in or out as required.

4. Tighten rear door window stabilizer retaining screws.

5. Install rear door trim panel and watershield.

Fore-and-Aft

1. Remove rear door trim panel and watershield. Doors

2. Loosen rear door glass front run and bracket retaining screw and washer assembly.

3. Adjust rear door window glass fore-or-aft as required.

4. Tighten screw and washer assembly.

5. Install rear door trim panel and watershield.