Seat Cushion Spring, Frame, Pad and Trim Cover Assemblies

RH Shown LH Similar:

REMOVAL
1. Remove seat and track assembly.
2. Remove trimmed seat back assembly from cushion assembly.
3. Remove arm rest assembly and bracket cover.
4. Disengage J-retainer on outboard side at seat lower edge.
5. Disengage plastic J-strip from front rail of front seat cushion frame and spring.
6. Peel front seat cushion cover from front to rear, disengaging hook fasteners as front seat cushion cover is being removed.
7. Remove front seat cushion cover.
8. Remove front seat cushion pad if required.
9. Remove any mechanism retaining parts if front seat cushion frame and spring must be replaced.

INSTALLATION
1. Follow removal procedure in reverse order.