Front

REMOVAL
1. Remove front seat track to floor insulators from front and rear of front seat track.

CAUTION: Use care when handling seat and track assembly. Dropping assembly or sitting on seat not secured in vehicle may result in damaged components.

2. Remove nuts and bolts retaining front seat track to front floor pan.
3. Move seat full-forward to release front seat track assist spring and lift seat and track assembly from vehicle.

INSTALLATION
1. Follow removal procedure in reverse order.
2. Tighten front retaining bolts to 18-24 Nm (14-17 Lb-Ft).
3. Tighten rear outboard retaining nut to 17-23 Nm (13-16 Lb-Ft).
4. Tighten rear inboard retaining nut to 68-92 Nm (51-67 Lb-Ft).
5. Check seat for proper operation.