Removal and Installation

REMOVAL AND INSTALLATION
1. Loosen engine air cleaner intake collar at air cleaner outlet tube.
2. Remove air cleaner outlet tube from Mass Air Flow (MAF) sensor.
3. Disconnect engine control sensor wiring from mass air flow sensor and Intake Air Temperature (IAT) sensor.
4. Remove engine air cleaner retaining nuts and engine air cleaner.
5. To install, reverse Removal procedure.
- Tighten engine air cleaner retaining nuts to 2.3-3.4 Nm (21-30 in lb).
- Tighten engine air cleaner intake collar to 3.4-4.6 Nm (30-40 in lb).
- Tighten air cleaner outlet tube retaining nut to 2.3-3.4 Nm (21-30 in lb).