Manual Seat Track

REMOVAL
1. Remove seat and track assembly.
2. Place seat and track assembly upside down on a clean bench.
3. Disconnect front seat track assist spring.

NOTE: To ease front seat track assist spring removal and installation, adjust seat to full forward position.

4. Remove the seat track-to-front seat cushion frame and spring retaining screws and remove front seat track assembly.
5. If the seat track is being replaced, transfer the front seat cushion extension handle to replacement front seat track assembly.

INSTALLATION
1. Follow removal procedure in reverse order.
2. Tighten the seat track-to-front seat cushion frame and spring retaining screws to 17-23 Nm (13-16 Lb-Ft).