Seat Back Cover

REMOVAL
1. Remove rear seat cushion assembly and rear seat back assembly from vehicle. Remove center arm rest assembly (if equipped) from rear seat back assembly.
2. With front side of rear seat back assembly facing down, disengage plastic retainers from the spring flange assembly that retain the rear seat back cover to the rear seat back pad and frame.
3. Remove rear seat back cover from rear seat back pad and frame.
4. Transfer all bolster tiedown wires to their respective listings in the replacement rear seat back cover.

INSTALLATION
1. To install, position rear seat back cover over the rear seat back pad and frame. Position plastic retainer(s) over the spring flange assembly.
2. Install rear seat back assembly and rear seat cushion into vehicle.