Safety Belt Warning

The safety belt warning operates as follows:
- When the ignition key is turned to RUN or START, power is supplied through Circuit 640 (R/Y) to the lighting control module.
- When ignition switch is in RUN or ACC, power is supplied through Circuit 296 (W/P) to lighting control module.
- The lighting control module then supplies power through Circuit 450 (DG/LG) to illuminate the safety belt warning indicator lamp for up to 60 seconds, if the LH front safety belt is not fastened.
- If the LH front safety belt is NOT fastened during this time, the safety belt buckle switch remains closed, supplying ground through Circuit 85 (BR/LB) to the lighting control module and causing it to sound for six seconds.