Flow of Diagnosis

1. Verify the customer's concern by operating the parking lamps to duplicate the condition.
2. Inspect to determine if one of the electrical conditions apply:

Electrical
- Damaged headlamp switch.
- Circuitry open/shorted.
- Bulb burned Out.
- Damaged connector.

3. If inspection reveals an obvious concern that is readily serviced, correct the concern before continuing with Inspection and Verification.
4. If a concern remains after the inspection, use Rotunda New Generation Star (NGS) Tester 007-00500 or equivalent connected to the data link connector (DLC) to retrieve continuous diagnostic trouble codes (DTCs) and to execute Self Test Diagnostics for the Lighting Control Module. If, after performing data link diagnostic test, the NGS Tester responds with NO RESPONSE/NOT EQUIPPED, go to Pinpoint Test EA. EA No Communication With Lighting Control Module
5. If self test is passed and no DTCs are retrieved, go to the Symptom Chart to continue diagnostics. Symptom Related Diagnostic Procedures
6. If DTCs are retrieved, go to the Lighting Control Module Diagnostic Trouble Code (DTC) Index to continue diagnostics. Lighting Control Module (LCM) DTC Index
7. If the lighting control module cannot be accessed by the NGS Tester, go to Pinpoint Test EA. EA No Communication With Lighting Control Module

Rotunda Service Bay Diagnostic System (SBDS (R)) 001-00001 may also be used to diagnose this system.