A/C Liquid Hose/Line

REMOVAL





1. Discharge the refrigerant from the A/C system following the recommended procedure and observing all safety precautions.
2. Disconnect and remove the condenser to evaporator tube using Spring Lock Coupling Disconnect Tool T81P-19623-G2 and T83P-19623-C. Service and Repair

INSTALLATION
1. With the protective caps installed, route the new refrigerant line.
2. Remove protective caps then connect the condenser to evaporator tube into the system using new O-ring seals lubricated with clean Motorcraft YN-12b refrigerant oil meeting Ford specification WSH-M1C231-B Service and Repair Spring Lock Coupling.
3. Leak-test, evacuate and charge the refrigerant system following the recommended procedures and safety precautions.
4. Check the A/C system for proper operation.