Rear

The rear wheel assembly is installed as follows:
^ The rear wheel bearing and inner wheel bearing oil seal are pressed into the axle tube assembly.
^ The semi-floating axle shafts are held in the rear axle housing by the U-washer positioned in a slot on the axle shaft splined end.
^ The wheel and tire assembly is bolted to the axle shaft flange by the lug bolt and lug nut.
^ Each rear wheel is bolted to rear hub assembly.
^ The rear disc brake rotor is mounted to lug bolts on the rear axle shaft hub flange. The wheel and tire assembly mounts on the same lug bolts and is held against the axle shaft hub flange and rear disc brake rotor by the lug nuts.
^ The rear wheel bearing is pressed into the outer axle tube housing.
^ The axle shaft is retained in the rear axle housing by the U-washer.