Attachment III - Technical Information: Overview

This program involves inspecting the brake tubes located directly below the driver's door area, near the transmission crossmember, for leakage due to contact with the floor pan. If no leakage is found, the brake tubes will be adjusted by installing new mounting clips. If leakage is found, the brake tubes will be repaired by splicing in new sections of brake tube. If the brake tube cannot be repaired, it will be replaced with newly designed service parts.

NOTE:
Technicians must judge for themselves, on a case by case basis, if an acceptable splice can be made based on the condition of the brake tubes.

NOTE:
This program covers only brake tube leakage caused by contact with the floor pan in the area located directly under the driver's door near the transmission crossmember. Any leakage found outside this area is not covered by this program.