General Specifications

General
* Flatness Deviation
Maximum: 0.025/25 mm x 25 mm (0.050/150mm x 150 mm)
+ Valve Arrangements (Front-to-Rear)
LH Intake: S-P-S-P-S-P
LH Exhaust: E-E-E-E-E-E
RH Intake: P-S-P-S-P-S
RH Exhaust: E-E-E-E-E-E


* Over the entire cylinder head gasket surface.
+ P = Primary, S = Secondary, E = Exhaust