Sedan

REMOVAL
1. Disconnect battery ground cable.
2. Open luggage compartment, remove pushpins and remove LH trim panel.
3. Disconnect wiring connectors and radio antenna lead in cable from rear chassis unit.
4. Remove three retaining nuts and rear chassis unit from vehicle.

INSTALLATION
1. Install rear chassis unit and secure with three nuts. Tighten nuts to 7.6-10.4 Nm (68-92 Lb-In) and screws to 3.4-4.8 Nm (31-42 Lb-In).
2. Connect radio antenna lead in cable and wire harness connector to rear chassis unit.
3. Install LH trim panel with pushpins.
4. Connect battery ground cable. Check for proper operation of integrated control panel, cassette tape player and digital audio compact disc player, if equipped.