Wagon

REMOVAL
1. Disconnect battery ground cable.
2. Open liftgate and remove spare tire.
3. Disconnect wiring connectors and radio antenna lead in cable from rear chassis unit.
4. Remove one nut, two screws and rear chassis unit from vehicle.

INSTALLATION
1. Install rear chassis unit and secure with two screws and one nut. Tighten nuts to 7.6-10.4 N m (68-92 Lb-In) and screws to 3.4-4.8 Nm (31-42 Lb-In).
2. Connect radio antenna lead in cable and wire harness connector to rear chassis unit.
3. Install LH trim panel with spare tire.
4. Connect battery ground cable. Check for proper operation of integrated control panel, cassette tape player and digital audio compact disc player, if equipped.