Door Alignment

The door hinges provide sufficient adjustment to correct most door misalignment conditions. The holes of the hinge attaching points are enlarged or elongated to provide for hinge and door alignment.

1. Determine which hinge bolts and nuts must be loosened to move door in desired direction.

2. Loosen hinge bolts and nuts enough to permit movement of door with padded pry bar.

3. Move door the estimated necessary distance. Tighten hinge bolts and nuts to 25-35 N.m (19-25 lb-ft) and check door fit to make sure there is no bind or interference with adjacent panel.

4. Repeat operation until desired fit is obtained.