Entry Code

The system (permanent) entry code is located in three places:

^ on the owner's wallet code card (in glove compartment)
^ electronically accessible by requesting the remote anti-theft personality module KEYCODE PID on the New Generation Star (NGS) Tester 007-00500 or equivalent.
^ on the remote anti-theft personality module housing The remote anti-theft personality module is programmed at the factory with a five-digit entry code. A replacement remote anti-theft personality module includes replacement labels and a new owner's code card.

To turn on the interior lamps and light all illuminated components:

^ press any button on the keyless entry keypad.

To program a temporary access code:

^ Enter the permanent code on the keyless entry keypad.
^ Press button 1/2 within 5 seconds of last digit of permanent code. (This alerts system to accept temporary code.)
^ Enter alternate five-digit code. Do not exceed 5 seconds between entering digits or between pressing the 1/2 key and entering the first digit.