Outside Rear View Mirror

REMOVAL
1. Disconnect battery ground cable.
2. Remove rear view mirror mounting hole cover by carefully prying off door window frame.
3. Remove front door trim panel.
4. Remove retaining screw and remove radio speaker from front door trim panel.
5. Disconnect outside rear view mirror wiring connector (C515-LH; C615-RH). Remove wiring guides as necessary.
6. Remove three outside rear view mirror retaining nuts. Remove outside rear view mirror while guiding wiring and connector through hole in door.

INSTALLATION
1. Install outside rear view mirror by routing connector and wiring through hole in front door. Install three retaining nuts. Tighten retaining nuts to 6-8 Nm (53-71 Lb-In).
2. Install radio speaker to front door trim panel with retaining screw.
3. Install rear view mirror mounting hole cover by lightly applying pressure until it snaps in place on window frame.
4. Connect mirror wiring connector and install wiring guides.
5. Replace front door trim panel.
6. Connect battery ground cable.