Sliding Roof Glass

REMOVAL
1. Raise roof sliding outer glass panel to the vent position.







2. Remove six screws (three each side) retaining roof sliding outer glass panel to roof sliding panel housing.
3. From outside of vehicle, lift roof sliding outer glass panel from vehicle.

INSTALLATION
1. With the help of a second technician, position roof sliding outer glass panel to roof sliding panel housing.
2. While second technician is holding roof sliding outer glass panel from outside vehicle, install screws retaining roof sliding outer glass panel to roof sliding panel housing. Tighten screws to 0.8-1.5 Nm (7-13 Lb-In).
3. Adjust roof sliding outer glass panel.