Wagon

REMOVAL
1. Open liftgate and remove two screws and handle from liftgate door trim panel.
2. Remove liftgate door trim panel.
3. Remove twelve capnuts from rear reflector and socket mounting studs.
4. Pull outboard ends of the rear reflector and socket away from liftgate to disengage four side pushpin retainers.
5. Gently pull rear reflector and socket away from liftgate.
6. Rotate lamp socket and wiring 1/4 turn counterclockwise and remove from rear reflector and socket.

INSTALLATION
1. Follow removal procedure in reverse order.
2. Tighten capnuts to 1.8-2.2 Nm (16-19 Lb-In).