Shift Interlock: Testing and Inspection

1. Turn ignition switch to RUN.
2. Verify that transaxle range selector lever is in PARK.
3. Without brake pedal applied, verify that transaxle range selector lever cannot be shifted from PARK.
4. Apply brake pedal. Verify that transaxle range selector lever can be shifted from PARK.
5. Shift transaxle range selector lever to REVERSE.
6. Verify that ignition switch cannot be turned to the LOCK position.
7. Shift transaxle range selector lever to PARK.
8. Verify that ignition switch can be turned to the LOCK position.
9. If shift-lock system is not operating as specified, refer to Diagnosis and Testing. Flow of Diagnosis