Floor Shift

NOTE: The transmission shift linkage adjustments must be performed in the order in which they appear.

1. Position transaxle range selector lever in DRIVE position against rearward stop. The floor transaxle range selector lever must be held in the rearward position using a constant force of 1.4 kg (3 lbs.) while linkage is being adjusted.
2. Loosen manual control lever-to-control cable retaining nut.
3. Move transaxle manual control lever to DRIVE position, second detent from most rearward position.
4. Tighten retaining nut to 17-23 Nm (13-17 ft. lbs.).
6. Check operation of transaxle in each transmission range position. Make sure that park mechanism and Transmission Range (TR) sensor are functioning properly.