Rear Wiper Motor

REMOVAL
1. Disconnect battery ground cable.
2. Open liftgate.







3. Remove rear window wiper motor cover from windshield wiper motor.







4. Disconnect rear window wiper/washer wire.
5. Unscrew windshield wiper output arm cover and remove.
6. Remove retaining nut, washer and bezel.
7. Remove nut retaining windshield wiper motor to back window glass.
8. Remove windshield wiper motor.

INSTALLATION
1. Follow removal procedure in reverse order.







2. Tighten inside nut to 5-7 Nm (44-62 Lb-In). Tighten outside nut to 15-20 Nm (11-15 Lb-Ft).